BPI认证要求
概述:[中介]Requirements of BPI approval
Requirements of BPI approval
1) Formulation and Material Characteristics
a) Full formulation disclosure of each constituent >0.1% including its associated dry weight percent and supplier information, CAS#’s and Material Safety Data Sheets (MSDS). The overall formulation percentage should equal 100. Carcinogens, reproductive toxins, or environmentally dangerous chemicals (PBT substances) are not permitted to be present in the formulation. Any external additive such as inks, coatings, lacquers and adhesives must be included in the formulation information.
b) Description of the Product(s) including a list of specific brand names and item numbers (also known as stock keeping units or SKU under which the product is identified to customers and in the market. For resins, intended end use(s) and manufacturing processes (injection, extrusion, thermoform, foodservice, film bags, laminations etc.)
c) Maximum thickness
d) Maximum density (required for bagasse, molded pulp and paper products)
e) Din Certco or Vincotte certificates, if applicable
2) Test Data to demonstrate compliance with ASTM D6400 or ASTM D6868
a) Biodegradation (Test data may not be older than two (2) years)
i) Biodegradation of the substrate by at least one of the following:
(1) Provide evidence of biodegradation of the substrate through the use of a Licensor Certified Product.
(2) Provide evidence of biodegradation of the substrate through testing performed by an Approved Testing Laboratory according to ASTM D5338 or an equivalent method (i.e. ISO 14855)
(3) Provide evidence of >95% biobased carbon content according to ASTM D6866 for unmodified materials of natural origin or paper
(4) Provide evidence of biodegradation of the substrate through scientific literature and/or research studies.
ii) Biodegradation of individual organic additives present in concentrations 1-10%, including, pigments, inks, colorants, scents, secondary polymers, glues, etc., by at least one of the following:
(1) Provide evidence of biodegradation of an additive through the use of a Licensor Certified Product.
(2) Provide evidence of biodegradation of the additive through testing performed by an Approved Testing Laboratory according to ASTM D5338, ISO 14855, ISO 14851 or ISO 14852.
(3) Provide evidence of biodegradation of the additive through scientific literature and/or research studies
b) Disintegration of the Final Product (Test Data must not be older than (2) years)
i) Quantitative disintegration of the final product at its maximum thickness and/or density, conducted by an Approved Testing Laboratory according to methods accepted in the most recent versions or ASTM D6400 or ASTM D6868 standard specifications.
c) Ecotoxicity / Phytotoxicity (Test Data must not be older than two (2) years)
i) Ecotoxicity should be performed according to OECD 208 after a successful disintegration test which was performed on the final product
ii) Must include the germination rate and biomass results for two plant species
iii) Ecotoxicity of additives > 0.1% must show proof that they are non-toxic
d) Regulated Metals Content (Test data must not be older than one (1) year)
i) To be performed on the final product
(1) Zinc, copper, nickel, cadmium, lead, mercury, chromium, molybdenum, selenium, arsenic and cobalt,
(2) To be performed by an Approved Testing Laboratory or ISO 17025 accredited laboratory for this specific method
e) Ash Content - Volatile Solids Content (Test data must not be older than one (1) year)
i) To be performed on the final product
(1) To be performed by an Approved Testing Laboratory or ISO 17025 accredited laboratory for this specific method
f) ATR or FTIR (Test data must not be older than one(1) year)
i) To be performed on the final product / product layers
(1) To be performed by an Approved Testing Laboratory or ISO 17025 accredited laboratory for this specific method.
- xmcert发布的信息
- OK Compost认证
- [中介]From the Belgian head office in Vilvoorde, and from the 13 other establishments throughout the world, more than 2,500 employees serve in excess of 15,000 industrial customers....
- GreenPla认证
- [中介]Former Biodegradable Plastics Society, Japan has changed the name to Japan BioPlastics Association on 15th of June 2007....
- DIN Certco认证
- [中介]DIN CERTCO operates a certification scheme for compostable products made of biodegradable materials and licenses the use of the corresponding Mark developed by European Bioplastics...
- BNQ认证
- [中介]加拿大BNQ认证...
- AS 4736认证和检测
- [中介]AS4736 AS5810 ASTM E1676...
- ABA认证或Seedling license认证
- [中介]ABA认证(Seedling logo):AS4736 AS5810 ASTM E1676检测和认证...
重发信息
- DLC需要提供什么资料哪里可以办理灯具DLC认证
- 粉末材料远红外检测 法向发射率测试 红外波长范围检测
- 提供KFC验厂咨询KFC验厂辅导服务KFC验厂资料
- 机车车辆设备电磁兼容测试中英文报告
- DLC认证哪里可以办理路灯美国能效认证DLC测试中心
- 北京西城环境适应性试验服务——CNAS认可机构出具检测报告
- 远红外产品检测 红外热图(使用效果对比) 红外法向发射率检
- 提供OKaidi验厂咨询OKaidi验厂资料
- 北京办理CNAS和CMA双标志中英文检测报告
- MTBF是什么哪里可以办理标投标报告MTBF报告
- LED球泡灯-光生物安全测试
- 提供CSP验厂咨询CSP验厂资料CSP验厂文件
- 有源应答器电磁兼容测试报告
- 平板电脑MTBF检测机构平均无故障时间测试报告办理机构
- 出具CNAS和CMA标识检测报告有何意义